Thermal Imager High Performance Industrial Fluke

Superior image quality : > Delivers the clear, crisp images needed to find problems fast with its 320x240 sensor. > Identify even the smallest temperature differences that could indicate problems with industry-leading thermal sensitivity ( NETD) . > Automatic alignment ( parallax correction) of visual and infrared images with Fluke patented IR-Fusion® > Optional telephoto and wide angle lenses available for added versatility and special applications. ( easily installable in the field) Easy to use : > Field replaceable batteries give you maximum flexibility no matter where your work takes you. > Intuitive, three-button menu is easy to use— simply navigate with the push of a thumb. > No need to carry pen and paper— record findings by speaking into the imager. Voice annotations can be recorded with every image you take. Voice comments are saved along with individual images for future reference. > One-handed focus capability, emissivity correction, reflected background temperature compensation, and transmission correction increase the accuracy of measurements in most situations. > Adjustable hand strap for left-or right-handed use. > Everything needed to get started is included. Rugged : > Optimized for field use in challenging work environments. > Engineered and tested to withstand a 2 m drop for the ultimate peace of mind - When was the last time you dropped a tool or piece of equipment? > Withstands dust and water— tested to an IP54 rating. Spesifications : > Temperature measurement range ( not calibrated below -10 ° C) : -20 ° C to + 600 ° C ( -4 ° F to + 1112 ° F) > Temperature measurement accuracy : ± 2 ° C or 2 % ( at 25 ° C nominal, whichever is greater) > On-screen emissivity correction : Yes > On-screen reflected background temperature compensation : Yes > On-screen transmission correction : Yes > Image capture frequency : 9 Hz refresh rate or 60 Hz refresh rate depending upon model variation > Detector type : 320 X 240 Focal Plane Array, uncooled microbolometer > Thermal sensitivity ( NETD) : d 0.045 degrees C and 45 mK > Total Pixels : 76, 800 > Infrared spectral band : 7.5 ¼ m to 14 ¼ m ( long wave) > Visual ( visible light) camera : Industrial performance 2.0 megapixel > Minimum focus distance : 46 cm ( approx. 18 in) > Standard infrared lens type -- Field of view : 23 ° x 17 ° -- Spatial resolution ( IFOV) : 1.25 mRad -- Minimum focus distance : 15 cm ( approx. 6 in) > Optional telephoto infrared lens type -- Field of view : 11.5 ° x 8.7 ° -- Spatial resolution ( IFOV) : 0.63 mRad -- Minimum focus distance : 45 cm ( approx. 18 in) > Optional wide-angle infrared lens type -- Field of view : 46 ° x 34 -- Spatial resolution ( IFOV) : 2.50 mRad -- Minimum focus distance : 7.5 cm ( approx. 3 in) > Focus mechanism : Manual, one-handed Smart Focus capability > Palettes -- Standard: Ironbow, Blue-Red, High Contrast, Amber, Amber Inverted, Hot Metal, Grayscale, Grayscale Inverted -- Ultra Contrast™ : Ironbow Ultra, Blue-Red Ultra, High Contrast Ultra, Amber Ultra, Amber Inverted Ultra, Hot Metal Ultra, Grayscale Ultra, Grayscale Inverted Ultra > Level and span : Smooth auto-scaling and manual scaling of level and span > Fast auto toggle between manual and auto modes : Yes > Fast auto-rescale in manual mode : Yes > Minimum span ( in manual mode) : 2.5 ° C ( 4.5 ° F) > Minimum span ( in auto mode) : 5 ° C ( 9 ° F)